INTERNATIONAL TOP PMU AND MICROBLADING INK MANUFACTURER
Language:
Home / All / PMU Machines & Cartridges / PMU Machines / YDPMU Artis Scalp Micropigmentation Machine – Adjustable SMP & PMU Device for Professional Artists & Training Academies | Charming Tattoo PMU Manufacturer
YDPMU Artis Scalp Micropigmentation Machine – Adjustable SMP & PMU Device for Professional Artists & Training Academies | Charming Tattoo PMU Manufacturer
Detail Information
Professional Scalp Micropigmentation Device YDPMU Artis Wireless PMU Machine – Brushless Motor, Adjustable Stroke 2.5–4mm | CharmingTattoo PMU Manufacture
YDPMU Artis Scalp Micropigmentation Machine is designed specifically for professional SMP artists, scalp micropigmentation clinics, PMU training academies, and certified operators, focusing on scalp micropigmentation (SMP), hair tattoo procedures, and advanced permanent makeup applications.
Unlike standard permanent makeup devices, the YDPMU Artis Wireless SMP Machine is a professional-grade scalp micropigmentation device and wireless PMU machine built for scalp-level pigment implantation scenarios, where stability, high torque output, and precise penetration control are more critical than cosmetic surface PMU work.
It features a 2.5–4mm adjustable stroke SMP machine system, allowing artists to switch between fine dot work, soft shading, hair replication, and full scalp coverage without changing machines. The 2–12V adjustable voltage PMU system with ±0.1V precision control provides fine tuning for different scalp skin conditions, pigment density requirements, and SMP dot size control.
The device is powered by a high-performance brushless motor (brushless SMP motor system), delivering stable torque and consistent output at up to 11,000 RPM, ensuring uniform dot formation and pigment implantation during scalp micropigmentation procedures. With a 1680mAh long-life battery, it supports approximately 3 hours of continuous working time and fully recharges in about 1 hour, making it ideal for professional SMP clinics, busy tattoo studios, and PMU training academies.
YDPMU Artis Wireless SMP Machine supports both wireless PMU machine mode and RCA wired SMP machine mode, giving academies, instructors, and professional artists flexible setup options for classroom training, demonstrations, and studio operations. The 0–4mm adjustable needle depth control system ensures precise penetration depth for different scalp pigmentation layers and hair density effects.
Compared with standard PMU machines, the YDPMU Artis SMP machine is positioned as a dedicated scalp micropigmentation solution system (professional SMP equipment), designed not only for artists but also for PMU training institutions, beauty academies, and OEM/ODM PMU machine brands that require consistent teaching standards, scalable production systems, and professional-grade SMP results.
| Stroke Range | 2.5–4mm adjustable |
| Working Voltage | 2–12V adjustable |
| Voltage Precision | ±0.1V |
| Motor Type | Brushless Motor |
Battery Capacity | 1680mAh |
Working Time | Approx. 3 hours |
Charging Time | 1 hour |
Motor Speed | 11,000 RPM (8V) |
Needle Depth | 0–4mm adjustable |
Operation Mode | Wireless & RCA Wired |
Noise Level | Low noise operation |
Q1. Can the YD Artis Wireless SMP machine handle different scalp densities and achieve consistent dot implantation with adjustable 2.5–4mm stroke and 2–12V control?
Yes. The YD Artis is designed for professional scalp micropigmentation (SMP) work, and its adjustable system allows stable performance across different scalp conditions.
With a 2.5–4mm adjustable stroke and 2–12V voltage range with ±0.1V precision, the machine can adapt to:
●Soft scalp skin (lower voltage, finer dot control)
●Medium density areas (balanced voltage and stroke)
●High-density coverage areas (higher torque and stable output)
The brushless motor (11,000 RPM) ensures consistent power delivery, helping maintain uniform dot implantation across long sessions, which is critical for SMP clinics and training environments.
Q2. What voltage and settings should I use on the YD Artis SMP machine for scalp micropigmentation dot work, shading, and full scalp coverage?
Recommended baseline settings for SMP procedures:
●DOT work / hairline design: ~7–8V, 2.5–3.0mm stroke
●Shading / blending zones: ~8–9V, 3.0–3.5mm stroke
●Full scalp coverage: ~8–10V, 3.5–4.0mm stroke
●SMP mode frequency: around 50Hz (recommended starting point)
The YD Artis allows fine adjustment in ±0.1V steps, which helps artists precisely control dot size, depth, and pigment saturation depending on skin response and treatment area.
Q3. Is the YD Artis Wireless SMP Machine suitable for professional SMP clinics and training academies that need both wireless and RCA wired operation with stable long-session performance?
Yes. The YD Artis Wireless SMP Machine is designed specifically for SMP clinics, PMU academies, and professional training systems.
Key advantages for institutional use:
●Wireless & RCA dual mode → flexible classroom + studio setup
●1680mAh battery (3 hours working time) → suitable for training sessions and client procedures
●1-hour fast charging → minimal downtime in high-volume environments
●Low noise brushless motor → better learning environment in academies
●Ergonomic 175g body → reduces fatigue during long teaching or practice sessions
●Universal cartridge compatibility → easy supply chain integration for schools and OEM brands
This makes it a scalable solution for both education systems and professional SMP service businesses.
The NEO Series is our latest innovation in PMU pigments, specifically designed for machine use, ensuring superior results for professionals.
The unique speed control panel lets you transition from the lowest to the highest speed in just 1 second, offering unmatched convenience.
Redesigned Tips Ensure Superior Stability, Reduced Vibration, And Gentleness On The Skin.
Say goodbye to outdated techniques—this 100% natural, mineral-based solution ensures safe and effective pigment removal across all skin types.
Review
- Loading...
Related Products
Schedule Your Brand with an IMPACT advisor to get started
What will happen after inquiry?
We aren't going to spam you with emails or call you a thousand times. After you send an inquiry, we'll ask you a few questions about what you're looking to acomplish, send you a recap for requirement. After confirmation, we will start the process of order and production.
Talk with an advisor to create SPMU & MICROBLADING customized products with your logo.
Enter your email address and we will connect you with the right person.
- *Name
- *Phone
- *Title
- *Content
DON'T MISS OUT!
Register to Get CT VIP Discount
subscription
Since 2002,
We are a pmu and microblading manufacturer with 20 years of production experience.
About >>STAY CONNECTED
QR code
